Products
- ERGELIT-10SD
- ERGELIT-10S special
- ERGELIT-Band
- ERGELIT-fix 35
- ERGELIT-Kanaltec CF
- ERGELIT-KBF 40
- ERGELIT-KBi
- ERGELIT-Kombina 10 S
- ERGELIT-Kombina 35
- ERGELIT-KS 1
- ERGELIT-KS 2
- ERGELIT-KS 2b L
- ERGELIT-KT 10
- ERGELIT-OED 35
- ERGELIT-rapid 10
- ERGELIT-SBM
- ERGELIT-S100
- ERGELIT-superfix 10
- ERGELIT-superfix 35
- ERGELIT-superfix 35 F
- ERGELIT-V35
- ERGELIT-V80
ERGELIT-superfix 35
High early strength grouting mortar for gaps from 10 mm
Manhole frame regulation in the case of new build and renovation
Manhole frame regulation in the case of new build and renovation
The basis of the success of ERGELIT-superfix grout in civil engineering projects is its rapid hardening which permits traffic loading within a very short time.
Choose between:
- ERGELIT-superfix 10
- ERGELIT-superfix 35 – the grout with granular strengthener, and
- ERGELIT-superfix 35 F –the superfix reinforced with fibres.
Height regulation when renovating a flanged manhole frame
Height regulation when renovating a flanged manhole frame
The highly efficient ERGELIT-superfix grout enables flanged manhole tops, as well as tops that have been cut or milled out, to be durably bedded in again from below or consolidated from the side. This mortar’s high resistance to frost and road-salt now comes into its own. In the case of asphalted roads, the road surface should be made good with a bitumen-based product. For concrete surfaces, choose ERGELIT-superfix 35 F.
Anchors and machinery foundations
Anchors and machinery foundations
In ERGELIT-superfix, ERGELIT-fix or ERGELIT-V you have a choice of three bedding mortars with different setting times. Depending on the requirements of the job, we offer different particle sizes from fine (up to 1 mm) through medium (up to 4 mm) to coarse (up to 8 mm). In this way you can choose the right solution for the foundations of any pillar, track or machinery.
