ERGELIT-KS 1

KS1

To the wall, Verfugen, tile laying, coating, early-firmly, high corrosion prevention

Fixing ceramic tiles

Fixing ceramic tiles

ERGELIT-KS 1 is the right adhesive mortar for fixing both large and small ceramic or fused cast basalt tiles, even in the most difficult situations.
ERGELIT-KS 1 is recommended for subsequent repointing in household wastewater environments and ERGELIT-KS 2 for industrial wastewater.

 

Invert renovation

Invert renovation

By using the time-saving mortars ERGELIT-KS 1 (for domestic wastewater) or ERGELIT-KS 2 (for industrial effluent), you can make rapid, durable repairs to corroded inverts. After thorough cleaning with a high pressure lance, the invert is reprofiled using a squeegee and ERGELIT-KS.

Invert
Renovation
before the renovation
after the invert renovation is completed

Lining with cement mortar - Wet spray technique

Lining with cement mortar - Wet spray technique

Using the wet spray technique, man-entry sewers and installations can be reprofiled or relined with a durable, minimum 5 mm coating of the appropriate anti-corrosion grade of ERGELIT-KS. In accessible sewers, this corrosion-resistant ERGELIT grout is the economical alternative to liner hose techniques. Thanks to the wet spray process, any size and cross-section of pipe can be stabilised and rehabilitated for decades.

Lining with cement mortar - Centrifugal spraylining process

Lining with cement mortar - Centrifugal spraylining process

When the entire conduit needs a new lining or coating, the answer is to apply ERGELIT-KS (selecting the appropriate level of corrosion protection) by centrifuge spray, in thicknesses from 5 mm to 40 mm.