Application
- Drain and sewer renovation
- Construction of manholes and wastewater installations
- The M-Coating Process
- Repairing manhole shafts and man-accessible pipes
- Invert renovation
- Wet spray technique
- Centrifugal spraylining process
- Repointing masonry
- Fixing ceramic tiles
- Renovating lateral connections
- Coating wastewater installations in sewage plants
- Oil-proof coating
- Manhole frame regulation
- Grouting mortars
The M-Coating Process
M-Coating is a renovation process designed for manhole shafts with a depth of up to 10 metres. Using a centrifuge spray, ERGELIT-KS (available in various degrees of corrosion resistance) can be applied in a coating of any desired thickness, from 5 mm minimum. This gives not only protection against corrosion, but greater static strength to the shaft as well.
The ERGELIT-KS range:
- ERGELIT-KS 1 against corrosion by domestic wastewater
- ERGELIT-KS 2 against corrosion by industrial effluent
- ERGELIT-KS 2b L against biogenic sulphuric acid corrosion
