Construction and renovation of wastewater installations

Many of the wastewater installations constructed since the end of the 19th century in Europe need renovation after some 50 to 100 years of use. Some of these waste systems or parts of systems - pipes, manholes, water purification plants, catchment basins, oil and fat separators, digestion tanks, sludge settlement tanks and aeration tanks - can suffer serious damage after only a short period of time. Since 1982 the ERGELIT dry mortars described below have been developed specifically for the repair of such damage in this environment. High resistance to aggressive substances is the hallmark of all ERGELIT mortars. On-site technical difficulties, such as pipes that are not man-accessible, confined working space or other special operating conditions, have always been a major consideration in the development of these ERGELIT mortars.

Our mortarprogram for the drain and sever renovation:

• ERGELIT-10S special
  to repair water infiltration and to accelerate other ERGELIT mortars
  
  
• ERGELIT-10SD
  the kneadable mortar for stopping water infiltration
  
  
• ERGELIT-Kombina S
  for quick repairs, consolidating climbing rungs, bricklaying, pointing and tiling
  
  
• ERGELIT-KS
  for bricklaying, pointing, tiling, coating, centrifuge spraying. It hardens quickly and gives high corrosion protection
  
  
• ERGELIT-KBi
  injection mortar for filling cavities, joints and holes
  
  
• ERGELIT-SBM
  for constructing sewers, drains and manhole shafts
  
  
• ERGELIT-V
  for bedding invert channels